13 1/2 x 39 frame for panoramic pictures by Rob Arra

If you need a frame for your unframed Rob Arra sports prints here is a high quality, low priced a 13.5" X 40" frame kit option for you.

This frame kit includes all you need to frame a Rob Arra sports print. The 13.5"X39" frame is black aluminum with glass. Outside dimensions are 13 ¾ inches x 40 ¼ . All necessary hardware is included -- frame connectors for coeners, spring loaders for securing the print, and of courzse wire for hanging. 13.5" X 39" white foam core backing is also supplied. The frame will measure almost 1 inch out from your wall and it is 3/8 of an inch wide with a rounded profile (front). Sorry, no shipping framed out of the continental U.S.

Panoramic Print Framing Instructions: 

-Remove frame from the box and remove any packing material

-Lay the frame face down. Unscrew just one of the screws on each side holding the bottom frame piece in place. Make sure it is the screw pointing up.

-Pull the long frame piece out. Take out the white foam backing.

-Remove the plastic layer from the plexiglass. Wipe the surface with a soft cloth if needed to remove residue or dust.

-Place the print face down on the glass. Put the foam backing on top of the print.

-Replace the long frame piece and tighten the screws.

-Take the 8 frame supports and bend the arch slightly so they fit underneath the black frame pieces. 3 each on the long ends and 1 on the shorter ends should keep the print firmly in place.