13 1/2" x 40" frame for panoramic pictures by James Blakeway.
If you have unframed city skyline prints or other prints by James Blakeway and you need a 13.5" X 40" frame, this is an inexpensive frame option for you.
The frame kit includes everything you need to frame a City skyline print The frame is black aluminum with glass. Outside dimensions are 13 ¾ inches x 40 ¼ . All hardware is included -- frame connectors, spring loaders, and wire for hanging. 13.5" X 40" foam core backing is also supplied. The frame measures almost 1 inch out from the wall and is 3/8 of an inch wide with a rounded profile (front). Sorry, no shipping framed out of the continental U.S.
Panoramic Print Framing Instructions:
-Remove frame from the box and remove any packing material
-Lay the frame face down. Unscrew just one of the screws on each side holding the bottom frame piece in place. Make sure it is the screw pointing up.
-Pull the long frame piece out. Take out the white foam backing.
-Remove the plastic layer from the plexiglass. Wipe the surface with a soft cloth if needed to remove residue or dust.
-Place the print face down on the glass. Put the foam backing on top of the print.
-Replace the long frame piece and tighten the screws.
-Take the 8 frame supports and bend the arch slightly so they fit underneath the black frame pieces. 3 each on the long ends and 1 on the shorter ends should keep the print firmly in place.